APPLE—有色金属
a. 交付时多余或者少于所指定的百分之三之内的数量是可以允许的。
b. 一吨将被理解为2000 磅，除非另作说明。
c. 如果合同中所写明货物的任何一部分在此份合同指定的时间内未从船上卸下或者交付，那么这些部分可以按照买方意愿取消，并且买方有权认为由卖方对此所产生的损失负责。如果因为被禁止进入港口和/或其他不可抗的状况导致的交付或者船运不能按时完成，合同将继续保持有效直到禁令取消后尽快完成，任何情况下，上述合同的条件将不由不可抗力状况的产生而发生改变。
d. 如果合同内所写明的任何一个阶段买方不能履行其责任而未及时开出信用证的，不能提供在合同内确切说明的适当运输和/或装船的责任时，那么这些部分可以按照卖方意愿取消并且卖方有权认为由买方对此所产生的损失负责。如果因为被禁止进入港口和/或其他不可抗的状况导致的交付或者船运不能按时完成，合同将继续保持有效直到禁令取消后尽快完成， 任何情况下，上述合同的条件将不由不可抗力状况的产生而发生改变。
e. 如果“典型”重量或者质量与合同写明的存在明显差异，买方应该迅速通知卖方，如必要的话，可以决定另一重量或者质量。卖方和/或买方应该指定一名独立检查员或者证实重量和/或质量的一名代表。在这个部分中， “典型”的单词的意思是指应该由买方与卖方之间协商决定，这取决于商品和它们的价值。
f.如果通过相互确定认为货物没有与在合同里所指定的描述相符，可以拒绝收货或降价收货。被拒货物的退回或替换，或降价多少将由买方与卖方之间进行共同协商，运费由卖方负责。卖方对买方的期望是尽力把被拒绝的部分限制在不可分类的部分，买方在接到卖方的把拒绝的部分退回的要求后要迅速照办，如果跟政府的规定没冲突的话。
BARLEY--#1号铜（光亮铜）
此铜线应由未经包裹，为纯粹裸露的纯铜线。为不小于B&S标准型号16号金属线。
BERRY--#1号铜线
此铜线要求是干净、未镀锡的、纯粹的、未经包裹的铜线及钢索。要大于B&S标准型号16号金属线，是免烧易碎的金属线。
BIRCH--#2号铜
此铜线要求是混合性质的铜线，且名义上含铜量按电解化验物要求为96%（至少为94%）。应该避免以下情况。过度的铅、镀锡的、焊接铜；黄铜线和青铜线；含有过量的油、铁制的、非金属的；烧制的铜线、包含绝缘体；发线；易碎的烧制铜线；能适度的防灰。
CANDY--#1号重铜
此铜线要求是干净的，未经包裹的纯粹铜片、铜屑、汽车门闩、换向器切片，且铜线的厚度不少于1/16英寸，免烧易碎的铜线；可能含有干净的铜管。
CLIFF--#2号铜
此铜线要求是混合性质的碎铜片，且名义上含铜量按电解化验物要求为96%（至少为94%）。应该避免以下情况。过度的铅、镀锡的、焊接铜；黄铜片和青铜片；含有过量的油、铁制的、非金属的；铜管含有除铜之外的东西或含有沉淀物，烧制的铜线、包含绝缘体；发线；易碎的烧制铜线；能适度的防灰。
CLOVE--#1号铜线结
此铜线要求是一号未经包裹的纯粹铜线片及铜线结。铜线为碎片，未镀锡、铅、锌、铝、钢，其他金属杂质，绝缘体，及其他不相关的杂质。含铜量至少为99%，标准小于B&S型号16。
COBRA--#2号铜线结
由以下部分组成，2个非合金的铜线废料结，破碎或者切片，至少97%的铜含量。金属杂质最多不超过0.50%的铝和1%的各种其它金属或者绝缘体。
COCOA--铜线结
由非合金的铜线废料结组成，破碎或者切片，最小有99%的铜含量，没有过多的其他成分。
其他非金属，最大金属杂质如下：
铝—0.05%
锡—0.25%
镍—0.05%
锑—0.01%
铁—0.05%
水利金属是买家与卖家达成协议的关键。
DREAM—轻铜
由各种各样，非合金铜废料所组成的铜含量为92%的铜(最小88%)，当以电解分析确定时，可以由铜板，水槽，水落管，水壶，锅炉和类似的废料组成。应该除去以下内容： 烧伤发线； 铜皮；电镀层；摩擦；燃烧铜线，包含绝缘的铜线；暖气装置，灭火器；冰箱；电版壳；筛选过多的铅，锡，焊接废料，铜器和青铜制品；过多的油，铁和非金属；可以有正常的灰。
DRINK--精炼黄铜
包含至少61.3%的铜和最大的5%的铁并且由黄铜和青铜组成，使其成为合金并且污染的铜废料。不包括绝缘线，铜氯化合物，电版壳和非金属。
DROVE—铜轴承废料
由各种各样铜废料组成，包括铜氯化合物，灰，含铁黄铜和铜，残渣和矿渣。不包括绝缘线；铜氯化物；无准备的缠结的材料；大的电动机；火花材料；石棉刹车；炉膛底部；含铅量过高的材料； 石墨坩埚； 并且有害物和爆炸材料。
DRIUD—绝缘铜线废料
由不同类型绝缘铜线组成。 被作为样品出售，以在买方与卖方之间的协商作为条件。
EBONY—合成物/红黄铜
由红黄铜废料，阀门，机器轴承和其他机器部分组成，包括各种各样铸件如铜，锡，锌，和铅。应该不包括半红黄铜铸件(78%到81%的铜)；铁路客车箱子和其他相似的含铅量高的合金；水龙头；关闭水量计；门；罐片；锭和燃烧的黄铜；铝，硅和锰青铜制品；铁和非金属。任何一片尺寸不能超过12"或者重量超过 100磅。
ENERV—红黄铜合成物
由红黄铜合成材料组成并且能出售，以样品或者分析为准。
ELDER—线纹巴式合金黄铜轴承
由红黄铜轴承组成并且包括汽车轴承和其它机器，包含不少于12%的高锡含量巴式合金， 并且不包括铁制轴承。
ELAND—高等级铅青铜固件
建议此类材料经过分析以后再进行出售。
ELIAS—高铅含量青铜固件和钻
建议此类材料经过分析以后再进行出售。
ENGEL—机械或者硬黄铜固件
应该包含不少于75%的铜含量，不少于6%的锡含量，和不少于6%的铅含量–同样不超过11%，所有杂质，除却锌，锑和不超过0.75%的镍；锑含量不超过0.50%。
ERIN—机械或者黄铜钻
应该包含不少于75%的铜含量，不少于6%的锡含量，和不少于6%的铅含量-同样不超过11%，所有杂质，除却锌，锑和不超过0.75%的镍；锑含量不超过0.50%。
GRAPE—开关和水龙头
由混合干净红黄铜组成，包括铬或者镀镍，不包括煤气开关，啤酒龙头和铝以及锌基础铸模材料，另外还包含一个半红35%的最小量。
HONEY—黄杂铜废料
由黄铜铸件组成，黄铜，黄铜杆，管子和各种各样的黄铜容器，包括镀黄铜。 切不可包含锰青铜，铝青铜，暖气装置或者暖气装置部分，铁以及过分脏和腐蚀的材料。
IVORY—黄杂铜铸件
在坩埚中由黄铜铸件组成，任何一片不能超过12 英寸；并且不可包含黄铜锻炉，硅青铜，铝青铜和锰青铜，且不超过包含15% 镀镍材料。
LABEL—全新黄杂铜碎片
应由自不含铅的黄杂铜板或铜片上切下的部分组成，干净并且没有外国物质且不包含超过10%的低于¼干净黄铜穿孔。不包括芒茨金属和海军黄铜。
LACE—黄铜壳容器
不含任何其它杂质由退火的70/30 黄铜壳箱组成。
LADY—黄铜壳容器
由干净的退火70/30的黄铜壳容器组成，没有包含其他杂质。
LAKE—黄铜轻武器和步枪外壳，干净退火
由干净退火70/30的黄铜框架组成，不包括子弹，铁和任何其他杂质。
LAMB—黄铜轻武器和步枪外壳，干净包裹
由干净包裹的70/30的黄铜壳组成，不包括子弹，铁和任何其他杂质。
LARK—黄铜管
由干净的黄铜管组成，退火或未退火。不包括铁，过度的灰尘，腐蚀和任何其他杂质。
MAIZE—混合新镍银碎片
由一种或者更多镍银合金组成，不包括铬或者任何其他电镀材料。 铅化镍银碎片应当被包装并且分开出售。
MAJOR—新镍银碎片和固件
由干净新镍银碎片，板，杆和其他卷状组成，不包括铬或者任何其他电镀材料。 必须按照指定镍含量的10%-12% -15%-18%-%20那样出售。 铅化镍银碎片应当被包装并且分开0出售。 至于它的特性描述应该由提供全部镍银材料方提出。
MALAR—新分类镍银碎片
由一种指定的镍银合金组成。
MALIC—旧镍银
由旧银镍板，管，杆，管，电线，屏幕组成，焊接或者拆焊。 没有任何异物，铁材料和其他金属装边。
MELON—黄铜管
由黄铜管组成没有电镀。 干净的黄铜管应不包含沉淀物和冷凝管。
NAGGY—镍银铸件
应当打包并分别出售。
NIECE—镍银车削件
必须看样，经分析后出售。
NIGHT—黄铜杆车削件
严格由杆车削件组成，不包括铝，锰，托宾和芒茨金属车削件；不包含多于3%的铁，油或者其他水分；不包括巴比特合金；包含不超过0.30%的锡和不超过0.15%的合金铁。
NOBLE—新黄杂铜杆
由新的干净杆组成，不包含超过0.30%的锡和超过0.15%的合金铁，不包括芒茨金属和海军黄铜或者任何其他合金。呈碎片状，尺寸不大于12"并且没有杂质。
NOMAD—黄铜车削件
黄的黄铜车削件组成，不包含铝，锰成分的车削件，不包含多于3%的铁，油或者其他水分；不包含巴比特合金。被出售时需提供样品或经分析。
OCEAN—混合汽车水箱
由混合汽车水箱组成，不包括铝水箱和含铁水箱。 总吨数说明应该包括水箱的总重量，除非另作说明。
PALES—黄铜冷凝器管
由被镀或未被镀的干净冷凝器管组成，不包含镍合金，铝合金，和其他腐蚀材料。
PALLU—铝黄铜冷凝器管
由被镀或未被镀的干净冷凝器管组成，不包含镍合金，和其他腐蚀材料。
PALMS—芒茨合金管
由被镀或未被镀的干净芒茨金属管组成，没有镍合金，铝合金，和其他腐蚀材料。
PARCH—锰青铜固件
应有不少于55%的铜含量，不超过1%的铅含量，并且不包括铝青铜和硅青铜。
RACKS—废铅—软
由干净软废铅组成，不包括其他材料象废渣，电池板，铅皮电缆，硬铅，可折叠管，铅箔，铝，锌，铁和黄铜装置，污染的化学制品导线和放射性物质等。
RADIO—混合硬/软废铅
由干净铅固件组成，不包括其他材料， 例如废渣，电池板，铅皮电缆，硬铅，可折叠管，铅箔，铝，锌，铁和黄铜装置，污染的化学制品导线和放射性物质等。
RAILS—铅电池板
无论汽车，工业还是其他混合类别，可能被包括的唯一金属就是铅质连接器。不包括非金属，例如，塑料或者橡胶，除了分离器还可能被包括在内。材料是干燥的。可以通过分析以后购买或者统一价格购买。
RAINS—干燥废料/干燥完整铅
不包含任何液体，也不包括任何塑料或者橡胶。 不包括无铅废料(镍镉蓄电池，等等)，工业，包装钢，和部分的飞机(包装铝)，断裂或者破碎的电池须经特别的同意。检阅程序包规格说明和规章应在销售装运前提交购买者。
RAKES—电池接线片
不包括铅废料，轮子，电池板，橡胶或塑料以及其他杂质。 至少要有97%的金属含量。检阅程序包规格说明和规章应在销售装运前提交购买者。
RANKS—白蜡
由餐具和冷饮柜组成但是必须要包含至少84%的锡。废料中一定不包括黄铜，锌和其他杂质。
RANCH—锡块
锡块必须包含至少98%的锡，并且不能包括任何液体，焊接，黄铜连接，白蜡，泵，罐片，以及灰尘。
RAVES—高锡含量巴式合金
包含至少78%的铅并且不包含黄铜或者含锌金属。
RELAY—包铅铜线缆
不包括有壳线缆和其他杂质。
RENTS—铅渣
应该干净，没有其他成分例如铁，灰尘，有害的化学制品或者其他金属物质并且没有放射性物质， 铝和锌。 或者以买方与卖方之间基于分析后的协议为准来交易。其他所包含金属例如锑，锡，等等，由买方与卖方之间按约定解释。检阅程序包规格说明和规章应在销售装运前提交购买者。
RINK—完整湿铅电池废料
由SLI组成(启动，点燃和点火)，汽车，卡车，8-D，高尔夫球车和船用电池。 不可包含塑料或者橡胶。 无铅材料(即，镍镉蓄电池等等)将不能被接受。其他类型如飞机凝胶(铝)，割草机，等等，检阅程序包规格说明和规章应在销售装运前提交购买者。
RONO—完整工业铅废料
由附以一些塑料的铅板组成。部分，断裂或者破碎的电池。检阅程序包规格说明和规章应在销售装运前提交购买者。
ROPER—完整工业铅电池
由公共汽车，柴油机，机车，电话，船用电池和其他电池组成。检阅程序包规格说明和规章应在销售装运前提交购买者。
ROPES—轮子
由不含铁的铅制轮胎组成。不包括铅废料，接线片或板并且没有杂质。检阅程序包规格说明和规章应在销售装运前提交购买者。
ROSES—混合常规巴式合金
由包含不少于8%锡含量的金属组成，不包括艾伦金属，装饰物和含锑的金属。 合金内一定不能包括锌和过高的铜含量。
SAVES—旧锌铸模废料
由各种各样旧锌铸件组成，含有或没有铁和其他杂质。 不包含污垢，废渣，块，融化片和杂质，灰尘，易挥发物质( 例如橡胶，软木，塑料，油脂，等等)。包含的材料如果含有超过30%的铁可能将对交易产生影响。
SCABS—新锌铸模废料
由全新，干净或者未使用的锌铸件组成。铸件必须未上漆，并且不受腐蚀影响
SCOPE—新镀锌铸模废料
由全新，干净或者未使用的锌铸件组成。不受腐蚀的影响。
SCOOT—锌铸模汽车格栅
由干净，旧的或者使用过的锌铸模汽车格栅组成，不包括焊接材料。
SCORE—旧锌废料
由干净的干燥锌废料组成，例如锌板，罐子盖子，干净非合金铸件和抗腐蚀盘。不包括钻和车削件。材料不可被过分腐蚀或者氧化， 不能包括额外的杂质。
SCREEN—新破碎锌
由未被腐蚀的新纯锌皮组成。不包含杂质或者附件。 打印机锌，例如雕锌板，平版印刷板和名片印刷机板须经特别的协议决定。
SCULL—新铸模厚板
由熔炼的锌基铸模材料组成，在光滑的干净的固体厚板里。 不包括废渣并且包含最小的90%的锌含量。包含不超过1%的铅和最多0.1%的镍。
SCRIBE—干净分类碎铸模废料，来自汽车
干净，不包含灰尘，油，玻璃，橡胶和其他垃圾。 包含最多5%的未熔炼物质(例如铁，铜，铝和其他金属)。
SCROLL—未分类锌压模废料
来源于汽车碎片。 材料包含大约55%的轴承锌废料。 其他有色金属( 例如铝，不锈钢，红金属，等等)大约40%。绝缘铜线大约1%。 废料，灰尘，玻璃，橡胶，油，铁，不超过5%。其他将在买方和卖方之间协商决定。
SCRUB—热浸渍电镀厚锌板碎屑
由热浸渍电镀92%的锌组成，断片直径小于2"，重量每个不超过100 磅。 如有更重的碎屑，将由买方和卖方之间自行协商。
SEAL—相连的电镀厚锌板顶部碎屑
从电镀产品顶部除下的未熔炼的锌渣，每一个重量不超过100磅， 最小锌含量为90%，更重的重量将在买方与卖方之间的共同协定决定。断片直径小于2"。
SEAM—相连的电镀厚锌板底部碎屑
从电镀产品底部除下的未熔炼的锌渣，每一个重量不超过100磅， 最小锌含量为92%，更重的重量将在买方与卖方之间的共同协定决定。断片直径小于2"。
SHELF—锌铸模渣滓
由大量熔融的锌铸模金属剩余物组成，必须是未经熔炼，发亮，光滑，并且没有受到腐蚀或者氧化影响。锌含量至少为85%。
TABLET—干净铝印刷板
由合金1100和/或3003组成，无涂层，未上漆，不包含纸，塑料，墨水和任何其他污染物。任何方向测量至少3 英寸。
TABLOID—新的，干净铝印刷板
由合金1100和/或3003组成，无涂层，未上漆，不包含纸，塑料，墨水和任何其他污染物。任何方向测量至少3 英寸。
TABOO—混合铜铝碎料和固件
由干净旧合金铝，铜及更多合金组成，不包含7000系列合金，铝箔，铸件，食品或者饮料集装箱，水箱壳，飞机板箔，油罐，瓶盖，塑料，灰尘和其他异物以及不超过1%的油脂。有任何变动将由买方和卖方之间协商决定。
TAINT/TABOR—干净混合旧铝合金板
由两种或两种以上干净的旧铝合金板材废料组成，不包含7000系列合金，铝箔，铸件，食品或者饮料集装箱，水箱壳，飞机板箔，油罐，瓶盖，塑料，灰尘和其他异物以及不超过1%的油脂。
TAKE—新铝罐
由干净的新的铝罐组成，并且不包含铁，灰尘，液体以及其他杂质，不超过1%的油脂。
TALAP—旧铝罐
由干净的旧的铝罐组成，并且不包含铁，灰尘，液体以及其他杂质。
TALCRED—切碎铝制易拉罐废料(UBC)
每立方英尺12到17磅的密度。一定磁性分开材料和没有钢， 领导，瓶子帽子，塑料罐装和其他塑料制品，玻璃，木头，灰尘，油脂，废料和其他异物。任何和全部铝项目，除了使用的饮料罐，不可接受。任何包括水分的项目以及其他变量将由买方和卖方商议决定。
TALDACK—高密度打包铝制易拉罐废料(UBC)
每立方英尺35到45磅的密度，每块不超过60 磅。尺寸范围从10"到13"x10¼"到20"x6¼"到9"。全部打包块必须具有相同尺寸。尺寸：可接受的打包范围尺寸从41"到44"x51"到 54"x54"到56"(高度)。唯一的可接受的包装方法如下： 使用最小5/8"， 020"厚的钢带捆扎。材料必须与磁性物质分开，不包含钢，铅，瓶盖，塑料罐装和其他塑料制品以及玻璃，木头，灰尘，油脂，废料及任何其他异物。除了使用的饮料罐，任何其他物质将不被接受。任何包括水分的项目以及其他变量将由买方和卖方商议决定。
TALDON—打包铝制易拉罐废料(UBC)
最小密度为14磅，每立方英尺的最大密度为17磅。尺寸：最小30立方英尺，包含范围的尺寸从24"到40"，30"到52"，40"到84"。用带绑扎将至少在5/8"，用020" 厚的钢条或者等效的力量捆紧。材料必须与磁性物质分开，不包含钢，铅，瓶盖，塑料罐装和其他塑料制品以及玻璃，木头，灰尘，油脂，废料及任何其他异物。任何包括水分的项目以及其他变量将由买方和卖方商议决定。
TALDORK—铝制易拉罐废料(UBC)
打包块最小每立方英尺50 磅。打包尺寸大小将从12 x 12到24x 24英寸不等，总包高度最大为48英寸。用带绑扎将至少在5/8"，用020" 厚的钢条或者等效的力量捆紧。 每包的重量不超过4000 磅。材料必须与磁性物质分开，不包含钢，塑料，玻璃，灰尘和任何其他异物。任何包括水分的项目以及其他变量将由买方和卖方商议决定。
TALE—油漆侧轨
由干净的铜铝侧轨组成，不包含铁，灰尘，纤维或者其他类型的杂质。
TALENT—涂层废料
由遮蓬，百叶窗，乙烯树脂，塑料等等组成，具体事项通过买方和卖方商议决定。
TALK—铜铝水箱
没有黄铜管，铁和其他杂质，由干净铝和铜水箱组成。
TALL—E.C. 铝结
由干净的E.C.铝组成，不包含铁，绝缘部分，铜和其他杂质，必须包含99.45%的铝含量。
TALON—新纯铝线缆
由干净铝组成，不包含铁，绝缘部分和任何其他异物的非合金铝电线。
TANN—新混合铝线缆
由新铝组成，干净的非合金铝电线或者线缆，不包含铁，绝缘部分和任何其他异物。
TASTE—旧纯铝线缆
不包含氧化物或者灰尘，非合金铝电线和电报的电线以及铁，绝缘部分和任何其他异物。
TASSEL—旧混合铝线缆
由非合金铝电线和线缆组成，不包含氧化物或者灰尘，铁，绝缘部分和任何其他异物。
TARRY—铝活塞
(a) 铝活塞由干净活塞铝组成,，不包含铁或者任何其他杂质，油和油脂的含量不超过2%。
(b) 铝活塞不包含任何其他杂质，为一个干净的整个铝活塞，油和油脂不超过2%。
(c) 铝活塞应该被在用以回收的基础上出售，或者与买主进行其他特殊安排。
TEENS—分离铝钻和车削件
由耐腐蚀铝或更多合金组成，不包含灰尘，铁，油，水分和任何其他杂质。 材料可以包含超10%的铁和/或易燃的化合物，不包含镁或者不锈钢。 避免高含量的锌，锡和镁的含量将在协商的基础上出售。
TELIC—混合铝钻和车削件
由耐腐蚀铝或更多合金组成，不包含灰尘，铁，油，水分和任何其他杂质。 材料可以包含超10%的铁和/或易燃的化合物，不包含镁或者不锈钢。 避免高含量的锌，锡和镁的含量将在协商的基础上出售。
TENSE—混合铝铸件
由可能包含汽车和飞机铸件的全部干净铝铸件组成， 并且不包含铁，灰尘，黄铜，巴氏合金和任何其他杂质以及不超过2%的油和油脂。
TEPID—破碎飞机铝板
在与买主协商的基础上出售。
TERSE—新铝箔
由干净，新的纯无涂层非合金铝组成， 未经阳极氧化处理，不包含纸，塑料或者任何其他杂质。
TESTY—旧铝箔
由干净，旧的纯无涂层非合金铝组成， 未经阳极氧化处理，不包含纸，塑料或者任何其他杂质。
THIGH—铝碾磨件
与买主在协商的基础上出售。
THIRL—铝渣
应该通过与买方协商的后出售。
Throb—焊接铝
由铝组成，为了装运的方便起见，可作为统一的形式或形状运输，例如铝锭，应该没有腐蚀或者包含任何杂质。 样品应该事先被分析。
TOOTH—分离全新铝合金碎料及固件
由全新干净的无涂层无油漆铝组成，该铝合金不包含电线，电线屏幕，灰尘和其他异物以及不能超过1%的油和油脂。此外直径应在1/2"在尺寸内。须经在买方与卖方之间的安排以确认货物的供应。
TOUGH—混合全新铝合金碎料及固件
由全新干净的无涂层无油漆铝组成，该铝合金不包含电线，电线屏幕，灰尘和其他异物以及不能超过1%的油和油脂。此外直径应在1/2"在尺寸内。须经在买方与卖方之间的安排以确认货物的供应。
TREAD—全新铝铸件, 锻造挤压
由新的清洁的无涂层的铝铸件组成，不包含不锈钢，锌，铁，灰尘，油，油脂和其他异物。
TRUMP—汽车铝铸件
由全部干净的汽车铝和易鉴定的不含铁铸件组成，不包含灰尘，黄铜，巴氏合金，黄铜和任何其他杂质以及不超过2%的油和油脂。
TWANG—绝缘铝线缆废料
由不同类型的绝缘铝组成，在买方和卖方协商同意的条件下，在有样品的基础上出售。
TWIST—飞机铝铸件
由来源于飞机的干净的铝铸件组成，不包含铁，灰尘，黄铜，巴氏合金，黄铜和任何其他杂质以及不超过2%的油和油脂。
TWITCH—切片铝废料(来源于汽车切碎)
材料必须是干燥的，并且最大锌含量不超过3%， 最大的镁含量为1%的和1. 5%的最大铁含量。非金属的总数之中橡胶最多只能占1%，具体出售情况由买方和卖方之间协商决定。
WAFER—镁碎片
由干净镁碎片组成，不包含铜，铝，和锌以及过度的油和其他杂质。
WALNUT—镁废料
由镁铸件，镁和飞机外壳和小汽车车轮等镁制品组成。 不包含黄铜，灰尘和其他杂质，具体将在买方与卖方之间通过协商决定，以买方与卖方之间的协议为准包含适量的油，油脂，和铁的杂质是可以被允许的。太大的尺寸将由买方和卖方商议决定。
WINE—镁雕刻板
不包含铜，铝，锌，并且电板是干净和没有其他杂质的。散装与否将在买方和卖方之间通过协商决定。
WOOD—镁装卸板
由干净的镁装卸板组成，或者买方与卖方同意的大小尺寸，不包括不同类型物质。
WORLD—镁车削件
推荐这些材料，具体内容将在买方和卖方之间协商解决。
ZORBA—混合切碎再生有色金属废料—来源于打包原料碎片
由混合的有色金属组成：如铝，铜，镁，不锈钢，镍，锌等，不同类型金属的百分比含量将通过买方与卖方之间协商决定，有时候也可以包含特别的金属。通过分离，漂浮，遮蔽，涡流等其他分离技术结合。没有放射性物质，渣滓或者灰，可以包括具体描述的尺寸和范围。可以包含高密度非金属(例如岩石，玻璃，规定的塑料和木头)。不符合的项目以及不在上述说明里的，例如水分和铁质附件或者存在或者缺乏的其他金属，将在买方与卖方之间通过协商决定。在此条件下买卖的材料将被鉴定为ZORBA (例如ZORBA 63 - 表明材料包含大约63%的有色金属含量)。
ZEBRA—(高密度)
由高密度有色金属组成，并用媒介分离生产技术生产(包含黄铜，铜，锌，非磁性的不锈钢和铜线)。 材料干燥并且没有过度氧化。 金属与非金属的含量以及污染的类型种种将在买方和卖方之间协商决定。
ZEPPELIN—(低密度)
由全新干净的任何精炼镍固件组成。 镍含量最小99%； 钴最大含量0.25%； 铜最大含量0.50%。 没有铸件，和不同类型物质以及其他污染。
AROMA—新镍废料
由旧和/或新的管子和任何其他精练镍固件组成。 材料包含至少98%的镍；最大含铜0.50%。 没有铸件，焊接，用铜焊接，或者油漆材料，其他金属薄层，不同类型物质和任何其他的污染。
BURLY—旧镍废料
由干净的，全新的镍，分开(通常相信分析等级)的两者中任何一个70/30，80/20， 或者90/10的CUPRO镍管组成。 一定没有不同类型物质和任何其他的污染。
DANDY—全新CUPRO镍碎料和固件
由分开(通常接受分析等级)的两者中任何一个如70/30，80/20，90/10的CUPRO镍固体组成，一定不包括任何其他污染。
DAUNT—CUPRO镍固件
由干净(通常接受分析等级)或者70/30，80/20，90/10的CUPRO镍,车削件组成。 关于固件的说明，分析，包装，将在买方和卖方之间协商细节。
DELTA—焊接的CUPRO镍固件
由一些基本元素如镍和铜或者全部的镍和铜组成，在任何场合，各种各样的镍铜应该具体说明和出售。
DECOY—CUPRO镍杆，车削件和钻
由干净的，新的杆，管，或者其他废料组成，没有不同类型物质和任何其他的污染。
DEPTH—混合镍-铜和镍-铜和铁
由各种各样的镍和铜，例如铜镍皮，和全部镍和铜组成。 在任何场合，各种各样的镍铜应该做出出售说明和分析。
HITCH—NEW R-MONEL CLIPPINGS AND SOLIDS
由干净的新的蒙乃尔铜-镍合金盘，杆，管或者任何其他部件组成，没有不同类型物质和任何其他的污染。
HOUSE—全新混合蒙乃尔铜-镍合金和碎料
由新的K 蒙乃尔铜-镍合金固件和碎料组成。没有不同类型物质和任何其他的污染。
IDEAL—旧蒙乃尔铜-镍合金板和固件
将由干净的K蒙乃尔铜-镍合金固件(例如板，盘，管，杆，锻炉)组成。 一定不包括溶胶，没有不同类型物质和任何其他的污染。
INDIAN—K蒙乃尔铜-镍合金固件
由干净的K蒙乃尔铜-镍合金固件组成。
JUNTO—焊接蒙乃尔铜-镍合金板和铸件
由各种各样等级的合金组成。没有不同类型物质和任何其他污染。细节关于物质描述，分析，包装将在买方与卖方之间协商决定。
LEMON—蒙乃尔铜-镍合金铸件
由不同类型干净的蒙乃尔铜-镍合金铸件组成，含最小60%的镍。没有不同类型物质或者任何其他污染。
LEMUR—蒙乃尔铜-镍合金车削件
由混合的蒙乃尔铜-镍合金组成，必须干燥，包含至少60%的镍。
PEKOE—200系列不锈钢废料固件
由各种类型的干净AISI不锈钢固件组成。 没有不同类型物质和其他污染，含5%的铜。
SABOT—不锈钢废料
由干净18-8 类型不锈钢夹和固件组成，包含最小7%的镍，16%的铬， 并且最多有50%钼、 50%铜。 亚磷0.45%，和0.3%的硫磺，没有有害的污染物。细节关于物质描述，将被分级以及另外分析，并会在买方与卖方之间协商决定。
ULTRA—不锈钢车削件
由干净18-8 类型不锈钢组成，包含最小7%的镍和16%的铬， 并且不包含有色金属，非金属，过度的铁，油和其他污染物。 细节关于物质描述，分析，包装将在买方与卖方之间协商决定。
VAUNT—螺纹电池
出售镍铁电池，没有铜终端线夹和过多的液体。不包含镍镉电池。
Apple—Nonferrous Terms
a. Delivery of more or less of the specified quantity upto 3 percent is permissible.
b. A ton shall be understood to be 2,000 pounds, unlessotherwise specified.
c.If any portion of the goods covered by a contract areunshipped orundelivered within the time specified in a contract,then thatportion issubject to cancellation by the buyer and/or the buyer has the righttohold the seller responsible for substantiated damages.
If,because of embargo and/or other conditions of forcemajeure, a deliveryor shipment cannot be made by the time specified, thecontract shallremain valid and shall be completed promptly upon lifting of theembargoand/or conditions of force majeure and the terms of said contractshallnot be changed.
d.If for any portion of a contract the buyer fails in atimely manner toopen a Letter of Credit and/or fails to provide properconveyance and/orshipping instructions as specified in the contract, then thatportion issubject to cancellation by the seller and/or the seller has theright tohold the buyer responsible for substantiated damages.
If,because of embargo and/or other conditions of forcemajeure, a deliveryor shipment cannot be made by the time specified, thecontract shallremain valid and shall be completed promptly upon lifting of theembargoand/or conditions of force majeure and the terms of said contractshallnot be changed.
e.If a significant weight or quality difference isapparent, the sellershould be notified promptly and, if requested, anotherweight or qualitydetermination should be taken. Seller and/or buyer should begiven theopportunity to appoint an independent surveyor or a representativetoverify weights and/or quality.
Forpurposes of this section, the meaning of the word“significant” shall bedetermined by agreement between buyer and seller,depending on thecommodities and their values.
f.If it is mutually determined that goods delivered donot conform to thedescription specified in the contract, then the shipment issubject torejection or downgrade.
Dispositionof, replacement of, and/or financialadjustment for rejected materialshall be subjected to mutual agreement betweenbuyer and seller. Selleris responsible for freight costs.
Buyeris expected, however, to exert every effort tolimit rejections only tothat portion of the shipment which is unsortable andto return therejected portion promptly upon request, if government regulationspermit.
Barley—No. 1 COPPER WIRE
Shallconsist of No. 1 bare, uncoated, unalloyed copperwire, not smaller thanNo. 16 B & S wire gauge. Green copper wire andhydraulicallycompacted material to be subject to agreement between buyer andseller.
Berry—No. 1 COPPER WIRE
Shallconsist of clean, untinned, uncoated, unalloyedcopper wire and cable,not smaller than No. 16 B & S wire gauge, free ofburnt wire whichis brittle. Hydraulically briquetted copper subject toagreement.
Birch—No. 2 COPPER WIRE
Shallconsist of miscellaneous, unalloyed copper wirehaving a nominal 96%copper content (minimum 94%) as determined by electrolyticassay. Shouldbe free of the following. Excessively leaded,tinned, solderedcopperwire; brass and bronze wire; excessive oil content, iron,andnon-metallics; copper wire from burning, containing insulation; hairwire;burnt wire which is brittle; and should be reasonably free ofash.Hydraulically briquetted copper subject to agreement.
Candy—No. 1 HEAVY COPPER
Shallconsist of clean, unalloyed, uncoated copperclippings,punchings, busbars, commutator segments, and wire not less than 1/16of an inch thick,free of burnt wire which is brittle; but may
include clean copper tubing. Hydraulically briquettedcopper subject to agreement.
Cliff—No. 2 COPPER
Shallconsist of miscellaneous, unalloyed copper scraphaving a nominal 96%copper content (minimum 94%) as determined by electrolyticassay. Shouldbe free of the following: Excessively leaded,tinned, solderedcopperscrap; brasses and bronzes; excessive oil content, ironandnon-metallics; copper tubing with other than copper connections orwithsediment; copper wire from burning,containing insulation; hairwire; burnt wirewhich is brittle; and should be reasonably free of ash.Hydraulicallybriquetted copper subject to agreement.
Clove—No. 1 COPPER WIRE NODULES
Shallconsist of No. 1 bare, uncoated, unalloyed copperwire scrap nodules,chopped or shredded, free of tin, lead, zinc,aluminum,iron, othermetallic impurities, insulation, and other foreigncontamination.Minimum copper 99%. Gauge smaller than No. 16 B & S wireandhydraulically compacted material subject to agreement between buyerand seller.
Cobra—No. 2 COPPER WIRE NODULES
Shallconsist of No. 2 unalloyed copper wire scrapnodules,chopped orshredded, minimum 97% copper. Maximum metal impurities notto exceed0.50% aluminum and 1% each of other metals
or insulation. Hydraulically compacted material subjectto agreement between buyer and seller.
Cocoa—COPPER WIRE NODULES
Shallconsist of unalloyed copper wire scrap nodules,chopped or shredded,minimum 99% copper. Shall be free of excessive insulationand othernon-metallics. Maximum metal impurities as follows:
Aluminum — .05%
Tin — .25%
Nickel — .05%
Antimony — .01%
Iron — .05%
Hydraulically compacted material subject to agreementbetween buyer and seller.
Dream—LIGHT COPPER
Shallconsist of miscellaneous, unalloyed copper scraphaving a nominal 92%copper content (minimum 88%) as determined by electrolyticassay andshall consist of sheet copper, gutters, downspouts,kettles, boilers,andsimilar scrap. Should be free of the following:Burnt hair wire;copperclad; plating racks; grindings; copper wire from burning,containinginsulation; radiators, fire extinguishers;refrigerator units;electrotypeshells; screening; excessively leaded, tinned, solderedscrap; brasses andbronzes; excessive oil,iron and non-metallics; andshould be reasonably free ofash. Hydraulically briquetted cop-persubject to agreement. Any items excluded
in this grade are also excluded in the higher gradesabove.
Drink—REFINERY BRASS
Shallcontain a minimum of 61.3% copper and maximum 5%iron and to consist ofbrass and bronze solids and turnings, and alloyed andcontaminatedcopper scrap. Shall be free of insulated wire,grindings,electrotypeshells and non-metallics. Hydraulically briquetted material subjecttoagreement.
Drove—COPPER-BEARING SCRAP
Shallconsist of miscellaneous copper-containingskimmings,grindings, ashes,irony brass and copper, residues and slags. Free ofinsulated wires;copper chlorides; unprepared tangled material;
largemotors; pyrophoric material; asbestos brakelinings; furnace bottoms;high lead materials; graphite crucibles; and noxiousand explosivematerials. Fine powdered material by agreement. Hydraulicallybriquettedmaterial subject to agreement.
Druid—INSULATED COPPER WIRE SCRAP
Shallconsist of copper wire scrap with various types ofinsulation.To be soldon a sample or recovery basis, subject to agreementbetween buyer andseller.
Ebony—COMPOSITION or RED BRASS
Shallconsist of red brass scrap, valves, machinerybearings and othermachinery parts, including miscellaneous castings made ofcopper, tin,zinc, and/or lead. Should be free of semi-red brass
castings(78% to 81% copper); railroad car boxes andother similar high-leadalloys; cocks and faucets; closed water meters; gates;pot pieces;ingots and burned brass; aluminum, silicon, and manganese bronzes;ironand non-metallics. No piece to measure more than 12" over any onepartor weigh over 100 lbs.
Enerv—RED BRASS COMPOSITION TURNINGS
Shall consist of turnings from red brass compositionmaterial and should be sold subject to sample or analysis.
Elder—GENUINE BABBITT-LINED BRASS BUSHINGS
Shallconsist of red brass bushings and bearings fromautomobiles and othermachinery, shall contain not less than 12% high tin-basebabbitt, andshall be free of iron-backed bearings.
Eland—HIGH GRADE-LOW LEAD BRONZE SOLIDS
It is recommended these materials be sold by analysis.
Elias—HIGH LEAD BRONZE SOLIDS AND BORINGS
It is recommended that these materials be sold on sampleor analysis.
Engel—MACHINERY or HARD BRASS SOLIDS
Shallhave a copper content of not less than 75%, a tincontent of not lessthan 6%, and a lead content of not less than 6%-—nor morethan 11%, andtotal impurities, exclusive of zinc, antimony,and nickel of notmorethan 0.75%; the antimony content not to exceed 0.50%. Shall be freeoflined and unlined standard red car boxes.
Erin—MACHINERY or HARD BRASS BORINGS
Shallhave a copper content of not less than 75%, a tincontent of not lessthan 6%, and a lead content of not less than 6%—nor morethan 11%, andthe total impurities, exclusive of zinc, antimony,and nickel ofnot morethan 0.75%, the antimony content not to
exceed 0.50%.
Fence—UNLINED STANDARD RED CAR BOXES (CLEAN JOURNALS)
Shallconsist of standard unlined and/or sweated railroadboxes and unlinedand/or sweated car journal bearings, free of yellow boxesandiron-backed boxes.
Ferry—LINED STANDARD RED CAR BOXES (LINED JOURNALS)
Shallconsist of standard babbitt-lined railroad boxesand/or babbitt-linedcar journal bearings, free of yellow boxes and iron-backedboxes.
GLOB - MIXED ELECTRIC MOTORS
Maycontain whole motors and/or dismantled motor partsthat are primarilycopper-wound. Maximum allowance of up to 5% aluminum-woundmotors,subject to agreement between buyer and seller. No steelattachments(gear reducers, bases, and pumps) or loose, free iron. Nosealed units or castiron compressors.
GLOBY - SHREDDED ELECTRIC MOTORS (also calledShredder Pickings or “Meatballs”)
Shallconsist of mixed copper bearing material fromferrous shreddingoperations, comprised of motors without cases. Maximumallowance of upto 10% aluminum-wound material. May contain insulated copperharnesswire. No free iron or sealed units. Trace percentages of othercontaminatesand fines may be present, subject to agreement betweenbuyer and seller.
Grape—COCKS AND FAUCETS
Shallconsist of mixed clean red and yellow brass,including chrome ornickel-plated, free of gas cocks, beer faucets, andaluminum and zincbase die cast material, and to contain a minimum of 35%semi-red.
HONEY—YELLOW BRASS SCRAP
Shallconsist of yellow brass scrap including, brasscastings, rolled brass,rod brass, tubing and miscellaneous yellow brasses,including platedbrass. Must be free of manganese-bronze,aluminumbronze,unsweatedradiators or radiator parts, iron, excessively dirtyand corrodedmaterials. Must also be free of any type of munitions includingbut notlimited to bullet casings.
Ivory—YELLOW BRASS CASTINGS
Shallconsist of yellow brass castings in crucible shape,no piece to measuremore than 12 inches over any one part; and shall be free ofbrassforgings, silicon bronze, aluminum bronze and manganese bronze, andnotto contain more than 15% nickel plated material.
Label—NEW BRASS CLIPPINGS
Shallconsist of the cuttings of new unleaded yellowbrass sheet or plate, tobe clean and free from foreign substances and not tocontain more than10% of clean brass punchings under ¼ inch.To be
free of Muntz metal and naval brass.
Lace—BRASS SHELL CASES WITHOUT PRIMERS
Shall consist of clean fired 70/30 brass shell cases freeof primers and any other foreign material.
Lady—BRASS SHELL CASES WITH PRIMERS
Shall consist of clean fired 70/30 brass shell casescontaining the brass primers and which contain no other foreign material.
Lake—BRASS SMALL ARMS AND RIFLE SHELLS, CLEAN FIRED
Shall consist of clean fired 70/30 brass shells free ofbullets, iron and any other foreign material.
Lamb—BRASS SMALL ARMS AND RIFLE SHELLS, CLEAN MUFFLED (POPPED)
Shall consist of clean muffled (popped) 70/30 brassshells free of bullets, iron and any other foreign material.
Lark—YELLOW BRASS PRIMER
Shallconsist of clean yellow brass primers, burnt orunburnt. Free of iron,excessive dirt, corrosion and any other foreignmaterial. Maize—MIXEDNEW NICKEL SILVER CLIPPINGS
Shallconsist of one or more nickel silver alloys and therange of nickelcontent to be specified, free of chrome or any other platingmaterial.Leaded nickel silver clippings should be packed and sold separately.Notto contain more than 10% of clean punchings under ¼ inch.
Major—NEW NICKEL SILVER CLIPPINGS AND SOLIDS
Shallconsist of new, clean nickel silver clippings,plate, rod andforgings,and other rolled shapes, free of chrome or any otherplatingmaterial. Must be sold on nickel content specifications such as
10%–12%–15%–18%–20%.Leaded nickel silver clippingsshould be packed and sold separately. Adescription as to its physicalcharacteristics should be made inoffering all nickel silver material.
Malar—NEW SEGREGATED NICKEL SILVER CLIPPINGS
Shall consist of one specified nickel silver alloy. Notto contain more than 10% of clean punchings under ¼ inch.
Malic—OLD NICKEL SILVER
Shallconsist of old nickel silver sheet, pipe, rod,tubes, wire,screen,soldered or unsoldered. Must not be trimmed seams alone andit is alsoto be free of foreign substances, iron rimmed material and othermetals.
Melon—BRASS PIPE
Shallconsist of brass pipe free of plated and solderedmaterials or pipeswith cast brass connections.To be sound, clean pipes free ofsedimentand condenser tubes.
Naggy—NICKEL SILVER CASTINGS
To be packed and sold separately.
Niece—NICKEL SILVER TURNINGS
To be sold by sample or analysis.
Night—YELLOW BRASS ROD TURNINGS
Shallconsist of strictly rod turnings, free ofaluminum,manganese,composition, Tobin and Muntz metal turnings; not tocontain over 3%free iron, oil or other moisture; to be free ofgrindings and babbitts;tocontain not more than 0.30% tin and not morethan 0.15% alloyed iron.
Noble—NEW YELLOW BRASS ROD ENDS
Shallconsist of new, clean rod ends from free turningbrass rods or forgingrods, not to contain more than 0.30% tin and not morethan 0.15% alloyediron. To be free of Muntz metal and naval brass or any otheralloys.Tobe in pieces not larger than 12" and free of foreign matter.
Nomad—YELLOW BRASS TURNINGS
Shallconsist of yellow brass turnings, free of aluminum,manganese andcomposition turnings, not to contain over 3% of free iron, oil orothermoisture; to be free of grindings and babbitts. To avoid dispute, tobesold subject to sample or analysis.
OCEAN – BRASS RADIATORS FROM AUTOMOBILES
Shallconsist of clean brass radiators and be free of allother types ofradiators. All contaminants, such as iron and plastic are not toexceed1% of weight. Any deviation to this specification to benegotiatedbetween buyer and seller.
Pales—ADMIRALTY BRASS CONDENSER TUBES
Shallconsist of clean sound Admiralty condenser tubingwhich may be plated orunplated, free of nickel alloy, aluminum alloy, andcorroded material.
Pallu—ALUMINUM BRASS CONDENSER TUBES
Shall consist of clean sound condenser tubing which maybe plated or unplated, free of nickel alloy and corroded material.
Palms—MUNTZ METAL TUBES
Shallconsist of clean sound Muntz metal tubing which maybe plated orunplated, free of nickel alloy, aluminum alloy, and corrodedmaterial.
Parch—MANGANESE BRONZE SOLIDS
Shallhave a copper content of not less than 55%, a leadcontent of not morethan 1%, and shall be free of aluminum bronze and siliconbronze.
Racks—SCRAP LEAD—SOFT
Shallconsist of clean soft scrap lead, free of othermaterials such asdrosses, battery plates, lead covered cable, hard lead,collapsibletubes, foil, type metals, aluminum, zinc, iron and brassfittings,dirtychemical lead and radioactive materials. Review packagingspecificationsand regulatory status pertaining to shipping with buyer prior tosale.
Radio—MIXED HARD/SOFT SCRAP LEAD
Shallconsist of clean lead solids, free of othermaterials, such as drosses,battery plates, lead covered cable, collapsibletubes, type metals,aluminum, zinc, iron and brass fittings, dirty chemicallead andradioactive materials. Review packaging specifications andregulatorystatus pertaining to shipping with buyer prior to sale.
Rails—LEAD BATTERY PLATES
Specifywhether automotive, industrial or mixed. Alsowhether they are groups orloose. The only other metallic that might beincluded could be leadconnectors.To be free of non-metallics, i.e., plastic orrubber, withthe exception that separators may be included. Material to be dry.Maybe bought on an assay basis or a flat price. Submarine plates subjecttonegotiation. Review packaging specifications and regulatory statuspertainingto shipping with buyer prior to sale.
Rains—SCRAP DRAINED/DRY WHOLE INTACT LEAD
Tobe free of any liquid. Cases to be either plastic orrubber and becomplete including caps. Non-lead (nicad, ni-fe, carbonaire,etc.) notacceptable. Industrial, steel cased, aircraft (aluminum cased)andpartial, cracked or broken batteries and batteries without capssubject tospecial agreement. Review packaging specifications andregulatory statuspertaining to shipping with buyer prior to sale.
Rakes—BATTERY LUGS
Tobe free of scrap lead, wheel weights, battery plates,rubber and/orplastic case material and other foreign material. A minimum of97%metallic content is required. Review packaging specificationsandregulatory status pertaining to shipping with buyer prior to sale.
Ranks—PEWTER
Shallconsist of tableware and soda-fountain boxes butshould contain aminimum of 84% tin. Siphon tops to be accounted forseparately.Materialmust be free of brass, zinc, and other foreign metals.
Ranch—BLOCK TIN
BlockTin must assay minimum of 98% tin, and to be freeof liquids,solder, andbrass connections, pewter, pumps, pot pieces, dirt.
Raves—HIGH TIN BASE BABBITT
Shall contain a minimum of 78% tin and be free of brassyor zincy metals.
Relay—LEAD COVERED COPPER CABLE
Free of armored covered cable, and foreign material.
Rents—LEAD DROSS
Shouldbe clean and reasonably free of other materialssuch as iron, dirt,harmful chemicals or other metals.To be free of radioactivematerials,aluminum and zinc. May be bought on an assay basis or as agreed tobybuyer and seller. Other metals present such as antimony, tin, etc., tobeaccounted for as agreed between buyer and seller. Material to bereadily dumpedfrom drums. An extra charge may be assessed if materialhas to be mechanicallyremoved.Review packaging specification andregulatory status pertaining toshipping with buyer prior to sale.
Rink—SCRAP WET WHOLE INTACT LEAD BATTERIES
Consistingof SLI (starting, lighting & ignition),automotive, truck, 8-D andcommercial golf cart and marine-type batteries. Casesto be eitherplastic or rubber and to be complete. Non-lead (i.e.,ni-cad,ni-fe,carbonaire, etc.) not acceptable. Other types i.e. aircraft(aluminum)gel-cel, lawnmower, etc., and partial, cracked or broken batteriesorbatteries without caps and the amount of liquid content and anyvariationsto the specification subject to special agreement.Reviewpackagingspecifications and regulatory status pertaining to shippingwith buyer prior tosale.
Rono—SCRAP INDUSTRIAL INTACT LEAD CELLS
Consistingof plates enclosed by some form of completeplastic case. Partial,cracked or broken cells, cells without caps and theamount of liquidcontent and any variations to the specification subject tospecialagreement. Review packaging specifications and regulatorystatuspertaining to shipping with buyer prior to sale.
Roper—SCRAP WHOLE INTACT INDUSTRIAL LEAD BATTERIES
Consistingof bus, diesel, locomotive, telephone and/orsteel cased batteries.Submarine batteries subject to negotiation.Partial,cracked, broken orbatteries without caps and the amount of liquid
contentand any variations to the specification subjectto special agreement.Review packaging specifications and regulatory statuspertaining toshipping with buyer prior to sale.
Ropes—WHEEL WEIGHTS
Toconsist of lead tire balances with or without ironclips. Not to includescrap lead, lugs or plates unless specifically agreedto.To be free offoreign material. Review packaging specifications andregulatory statuspertaining to shipping with buyer prior to sale.
Roses—MIXED COMMON BABBITT
Shallconsist of lead base bearing metal containing notless than 8% tin, freefrom Allens metal, ornamental, antimonial and typemetal. Must be freefrom all zinc and excessive copper in the alloy.
Saves—OLD ZINC DIE CAST SCRAP
Shallconsist of miscellaneous old zinc base diecastings, with or withoutiron and other foreign attachments.Must be free ofborings,turnings,dross pieces, chunks, melted pieces and skimmings. Allunmeltables,dirt, foreign attachments, and volatile substances (such asrubber,cork, plastic, grease, etc.) are deductible. Material containinginexcess of 30% iron will not constitute good delivery.
Scabs—NEW ZINC DIE CAST SCRAP
Shall consist of new or unused, clean, zinc base diecastings. Castings to be unplated, unpainted, and free from corrosion.
Scope—NEW PLATED ZINC DIE CAST SCRAP
Shall consist of new or unused clean, plated zinc basedie castings,free from corrosion.
Scoot—ZINC DIE CAST AUTOMOTIVE GRILLES
Shallconsist of clean, old or used zinc base die castautomotive grilles,free from soldered material. All foreign attachments andextraneousmaterials are deductible.
Score—OLD SCRAP ZINC
Shallconsist of clean dry scrap zinc, such as sheets,jar lids, cleanunalloyed castings and anti-corrosion plates. Borings andturnings arenot acceptable. Material must not be excessively corroded oroxidized.All foreign attachments and extraneous materials are deductible.
Screen—NEW ZINC CLIPPINGS
Shallconsist of any new pure zinc sheets or stampingsfree from corrosion. Tocontain no foreign material or attachments. Printerszinc, such asengravers zinc, lithograph sheets and addressograph
plates subject to special arrangements. Printers zinc tobe free of routings.
Scull—ZINC DIE CAST SLABS or PIGS
Shallconsist of melted zinc base die cast materials, insmooth clean solidslabs or pigs. Material to be free from drosses and tocontain a minimumzinc content of 90%.To contain a maximum of
0.1% nickel and maximum of 1% lead. Blocks are acceptableupon mutual agreement.
Scribe—CRUSHED CLEAN SORTED FRAGMENTIZERS DIE CAST SCRAP,AS PRODUCED FROM AUTOMOBILE FRAGMENTIZERS
Tobe clean, free of dirt, oil, glass, rubber, and trash.To contain amaximum of 5% unmeltables such as free iron, copper, aluminum andothermetals.
Scroll—UNSORTED ZINC DIE CAST SCRAP
Producedfrom automobile fragmentizers. Material tocontain about 55%zinc-bearing scrap. Other nonferrous metals such asaluminum,stainlesssteel, red metal, etc., to be about 40%. Insulated
copperwire about 1%.Trash, dirt, glass, rubber, oil,iron, not to exceed 5%.Any variations to be sold by special arrangementbetween buyer andseller.
Scrub—HOT DIP GALVANIZERS SLAB ZINC DROSS (Batch Process)
Shallconsist only of galvanizers unsweated zinc dross inslab form from hotdip galvanizing (Batch Process) with a minimum zinc contentof 92% andshall be free of skimmings and tramp iron. Broken pieces under2" indiameter shall not exceed 10% of the weight of each shipment. Slabsshallnot weigh over 100 pounds each.Heavier pieces acceptable uponmutual agreementbetween buyer and seller. Material from continuousgalvanizing operation is notacceptable.Blocks are acceptable uponmutual agreement.
Seal—CONTINUOUS LINE GALVANIZING SLAB ZINC TOP DROSS
Shallconsist of unsweated zinc dross removed from thetop of a continuousline galvanizing bath, in slab form not weighing in excessof 100 poundseach, with a minimum zinc content of 90%
Heavierpieces acceptable upon mutual agreement betweenbuyer and seller. Shallbe free of skimmings. Broken pieces under 2" indiameter shall notexceed 10% of the weight of each shipment.
Seam—CONTINUOUS LINE GALVANIZING SLAB ZINC BOTTOM DROSS
Shallconsist of unsweated zinc dross removed from thebottom of a continuousline galvanizing bath, in slab form not weighing inexcess of 100 poundseach, with a minimum zinc content of 92%.Heavier piecesacceptable uponmutual agreement between buyer and seller. Shall be free ofskimmings.Broken pieces under 2" in diameter shall not exceed 10% of theweight ofeach shipment.
Shelf—PRIME ZINC DIE CAST DROSS
Shallconsist of metal skimmed from the top of pot ofmolten zinc die castmetal. Must be unsweated, unfluxed, shiny, smooth,metallic and freefrom corrosion or oxidation. Should be poured in molds or insmallmounds weighing not over 75 pounds each. Zinc shall be minimum of 85%.
Tablet—CLEAN ALUMINUM LITHOGRAPHIC SHEETS
Toconsist of 1000 and/or 3000 series alloys, to be freeof paper,plastic,excessively inked sheets, and any other contaminants.Minimumsize of 3"(8 cm) in anydirection.
Tabloid—NEW, CLEAN ALUMINUM LITHOGRAPHIC SHEETS
Toconsist of 1000 and/or 3000 series alloys, uncoated,unpainted,to befree of paper, plastic, ink, and any other contaminants.Minimum size of3" (8 cm)in any direction.
Taboo—MIXED LOW COPPER ALUMINUM CLIPPINGS AND SOLIDS
Shallconsist of new, clean, uncoated and unpainted lowcopper aluminum scrapof two or more alloys with a minimum thickness of 0.015inches (.38 mm)and tobe free of 2000 and 7000 series,
hairwire, wire screen, punchings less 1/2 inch (1.25 cm) diameter,dirt, andothernon-metallic items. Grease and oil not to total more than1%.Variations to thisspecification should be agreed upon prior toshipment between the buyer andseller.
Taint/Tabor—CLEAN MIXED OLD ALLOY SHEET ALUMINUM
Shallconsist of clean old alloy aluminum sheet of two ormore alloys,free offoil, venetian blinds, castings, hair wire, screenwire,food or beveragecontainers, radiator shells, airplane sheet, bottle
caps, plastic, dirt, and other non-metallic items. Oiland grease not to total more than 1%. Up to 10% Tale permitted.
Take—NEW ALUMINUM CAN STOCK
Shallconsist of new low copper aluminum can stock andclippings,clean,lithographed or not lithographed, and coated with clearlacquer but freeof lids with sealers, iron, dirt and other foreigncontamination.Oil notto exceed 1%.
Talc—POST-CONSUMER ALUMINUM CAN SCRAP
Shallconsist of old aluminum food and/or beverage cans.The material is to befree of other scrap metals, foil, tin cans, plasticbottles,paper,glass, and other non-metallic items.Variations to this
specification should be agreed upon prior to shipmentbetween the buyer and seller.
Talcred—SHREDDED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shallhave a density of 12 to 17 pounds per cubic foot(193 to 273kg/m3).Material should contain maximum 5% fines less than 4 mesh (U.S.standardscreen size) (6.35 mm).Must be magnetically separated materialand free of steel, lead, bottle caps,plastic cans and other plastics,glass, wood, dirt, grease, trash, and otherforeign substances. Any freelead is basis for rejection. Any and all aluminumitems, other than usedbeverage cans, are not acceptable.Variations to thisspecificationshould be agreed upon prior to shipment between the seller andbuyer.
Taldack—DENSIFIED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shallhave a biscuit density of 35 to 50 pounds per cubicfoot (562 to 802kg/m3).Each biscuit not to exceed 60 pounds (27.2 kg). Nominal biscuitsize range from 10" to13" x 101/4" (25.4 x 33 x 26 cm)to 20" x 61/4" x9" (50.8 x 15.9 x 22.9 cm). Shall have banding slots in bothdirectionsto facilitate bundle banding. All biscuits comprising abundle must be ofuniform size. Size: Bundle range dimensions acceptableare 41" to 44"x 51" (104 to 112 cm) to54" x 54" (137 x 137 cm)to 56”(142 cm) high.The only acceptable tying methodshall be as follows:Using minimum 5/8" (1.6 cm) wide by .020" (.05 cm) thick steel straps,the bundles are to bebanded with one vertical band per row and aminimum of two firth (horizontal)bands per bundle. Use of skids and/orsupport sheets of any material is notacceptable. Must be magneticallyseparated material and free of steel, lead,bottle caps, plastic cansand other plastic, glass, wood, dirt, grease,trash,and other foreignsubstances. Any free lead is basis for rejection.Anyand all aluminumitems, other than used beverage cans, are not acceptable.Items notcovered in the specifications, including moisture,and any variationstothis specification should be agreed upon prior to shipment betweentheseller and buyer.
Taldon—BALED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shallhave a minimum density of 14 pounds per cubic foot(225kg/m3), and amaximumdensity of 17 pounds per cubic foot (273kg/m3) for unflattenedUBC and 22 pounds per cubicfoot (353kg/m3) forflattened UBC. Size:Minimum 30 cubic feet (.85 m3),with bale range dimensions of 24" to40"(61 to 132 cm) by30" to 52" (76 to 132 cm)by 40" to 84"(102 to 213cm).The only acceptable tying method shall be as follows: four to six5/8" (1.6 cm) x .020"(5 mm) steel bands, or six to ten #13 gaugesteelwires (aluminum bands or wires are acceptable in equivalent strengthandnumber).Use of skids and/or support sheets of any material isnotacceptable.Must be magnetically separated material and free ofsteel,lead,bottle caps, plastic cans and other plastic, glass, wood,dirt,grease, trash,and other foreign substances. Any free lead is basisfor rejection. Any and allaluminum items, other than used beveragecans, are not acceptable.Variations tothis specification should beagreed upon prior to shipment between the buyerand seller.
Taldork—BRIQUETUED ALUMINUM USED BEVERAGE CAN (UBC) SCRAP
Shallhave a briquette density of 50 pounds per cubicfoot (800kg/m3)minimum.Nominal briquette size shall range from 12" to 24" (30.5 x 61 cm) x 12"to 24" (30.5 x 61 cm) in uniform profile with a variablelength of 8"(20.3 cm)minimum and 48" (122 cm)maximum. Briquettes shall be bundledor stacked on skids and secured with aminimum of one vertical band perrow and a minimum of one girth band perhorizontal layer. Briquettes notto overhang pallet.Total package height shallbe 48 (122 cm)maximum.Banding shall be at least 5/8" (1.6 cm) wide by .020" (5 mm) thicksteel strapping or equivalent strength.The weight ofany bundle shallnot exceed 4,000 pounds (1.814 mt). Material must bemagneticallyseparated and free of steel, plastic, glass, dirt and all otherforeignsubstances.Any and all aluminum items other than UBC are unacceptable.
Anyfree lead is basis for rejection. Items not coveredin thespecification, including moisture, and any variations tothisspecification should be agreed upon prior to shipment between thebuyer andseller.
Tale—PAINTED SIDING
Shallconsist of clean, low copper aluminum siding scrap,painted one or twosides, free of plastic coating, iron, dirt, corrosion,fiber,foam, orfiberglass backing or other non-metallic items.
Talk—ALUMINUM COPPER RADIATORS
Shallconsist of clean aluminum and copper radiators,and/or aluminum fins oncopper tubing, free of brass tubing, iron and otherforeigncontamination.
Tall—E.C. ALUMINUM NODULES
Shallconsist of clean E.C. aluminum, chopped orshredded, free of screening,hair-wire, iron, copper, insulation and othernon-metallic items. Mustbe free of minus 20 mesh material. Must contain 99.45%aluminum content.
TALLY – All ALUMINUM RADIATORS FROM AUTOMOBILES
Shallconsist of clean aluminum radiators and orcondensers. Should be free ofall other “radiator” type commodities such as“Talk” or “Ocean”, shallalso be free of copper, brass, iron, plastic, foamexcessive oxidationand other foreign contamination.
Talon—NEW PURE ALUMINUM WIRE AND CABLE
Shallconsist of new, clean, unalloyed aluminum wire orcable free from hairwire, ACSR, wire screen, iron, insulation and othernonmetallic items.
Tann—NEW MIXED ALUMINUM WIRE AND CABLE
Shallconsist of new, clean unalloyed aluminum wire orcable which may containup to 10% 6000 series wire and cable free from hairwire, wire screen,iron, insulation and other non-metallic items.
Taste—OLD PURE ALUMINUM WIRE AND CABLE
Shallconsist of old, unalloyed aluminum wire and cablecontaining not over 1%free oxide or dirt and free from hair wire, wirescreen,iron, insulationand other non-metallic items.
Tassel—OLD MIXED ALUMINUM WIRE AND CABLE
Shallconsist of old, unalloyed aluminum wire and cablewhich may contain upto 10% 6000 series wire and cable with not over 1% freeoxide or dirtand free from hair wire, wire screen, iron, insulation andothernon-metallic items.
Tarry A—CLEAN ALUMINUM PISTONS
Shallconsist of clean aluminum pistons to be free fromstruts,bushings,shafts, iron rings and non-metallic items. Oil and grease notto exceed2%.
Tarry B—CLEAN ALUMINUM PISTONS WITH STRUTS
Shallconsist of clean whole aluminum pistons withstruts. Material is to befree from bushings, shafts, iron and non-metallicitems . Oil and greasenot to exceed 2%.
Tarry C—IRONY ALUMINUM PISTONS
Shallconsist of aluminum pistons with non-aluminumattachments to be sold ona recovery basis or by special arrangement betweenbuyer and seller.
Teens—SEGREGATED ALUMINUM BORINGS AND TURNINGS
Shallconsist of aluminum borings and turnings of onespecified alloy.Materialshould be free of oxidation, dirt, free iron,stainless steel,magnesium, oil, flammable liquids, moisture and othernonmetallic items.Fines should not exceed 3% through a 20 mesh (U.S. standard)screen.
Telic—MIXED ALUMINUM BORINGS AND TURNINGS
Shallconsist of clean, uncorroded aluminum borings andturnings of two ormore alloys and subject to deductions for fines in excess of3% througha 20 mesh screen and dirt, free iron, oil, moisture and allothernon-metallic items. Material containing iron in excess of 10%and/or freemagnesium or stainless steel or containing highly flammablecutting compoundswill not constitute good delivery.To avoid dispute,material should be sold onbasis of definite maximum zinc, tin andmagnesium content.
Tense—MIXED ALUMINUM CASTINGS
Shallconsist of all clean aluminum castings which maycontain auto andairplane castings but no ingots, and to be free of iron,brass,dirt andother non-metallic items. Oil and grease not to total more than2%.
Tepid—AIRCRAFT SHEET ALUMINUM
Should be sold on recovery basis or by specialarrangements with purchaser.
Terse—NEW ALUMINUM FOIL
Shallconsist of clean, new, pure, uncoated 1000 and/or3000 and/or 8000series alloy aluminum foil, free from anodized foil,radar foilandchaff, paper, plastics, or any other non-metallic items.
Hydraulically briquetted material and other alloys byagreement between buyer and seller.
Tesla—POST CONSUMER ALUMINUM FOIL
Shallconsist of baled old household aluminum foil andformed foil containersof uncoated 1000, 3000 and 8000 series aluminum alloy.Material may beanodized and contain a maximum of 5% organic residue. Materialmust befree from radar chaff foil, chemically etched foil, laminatedfoils,iron, paper, plastic and other nonmetallic contaminants.
Tetra—NEW COATED ALUMINUM FOIL
Shallconsist of new aluminum foil coated or laminatedwith ink,lacquers,paper, or plastic. Material shall be clean, dry, free ofloose plastic,PVC and other non-metallic items. This foil is sold on a metalcontentbasis or by sample as agreed between buyer and seller.
Thigh—ALUMINUM GRINDINGS
Should be sold on recovery basis or by specialarrangements with purchaser.
Thirl—ALUMINUM DROSSES, SPATTERS, SPILLINGS, SKIMMINGSAND SWEEPINGS
Should be sold on recovery basis or by specialarrangements with purchaser.
Throb—SWEATED ALUMINUM
Shallconsist of aluminum scrap which has been sweated ormelted into a formor shape such as an ingot, sow or slab for convenience inshipping; tobe free from corrosion, dross or any non-aluminum inclusions.Should besold subject to sample or analysis.
Tooth—SEGREGATED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS
Shallconsist of new, clean, uncoated and unpaintedaluminum scrap of onespecified aluminum alloy with a minimum thickness of.015" (.38 mm)andto be free of hair wire, wire screen, dirt and other non-metallicitems. Oiland grease not to total more than 1%. Also free frompunchings less than1/2" (1.27 cm) insize.
Tough—MIXED NEW ALUMINUM ALLOY CLIPPINGS AND SOLIDS
Shallconsist of new, clean, uncoated and unpaintedaluminum scrap of two ormore alloys with a minimum thickness of .015" (.38mm) and to be free ofhair wire, wirescreen, dirt and other nonmetallic items. Oil and greasenot to total more than1%. Also free from punchings less than 1/2" (1.27cm) in size.
Tread—SEGREGATED NEW ALUMINUM CASTINGS, FORGINGS ANDEXTRUSIONS
Shallconsist of new, clean, uncoated aluminum castings,forgings,andextrusions of one specified alloy only and to be freefromsawings,stainless steel, zinc, iron, dirt, oil, grease and othernonmetallicitems.
Troma – ALUMINUM AUTO or TRUCK WHEELS
Shallconsist of clean, single-piece, unplated aluminumwheels of a singlespecified alloy, free of all inserts, steel, wheelweights,valve stems,tires, grease and oil and other non-metallic items.
Variations to this specification should be agreed uponprior to shipment between the buyer and seller.
Trump—ALUMINUM AUTO CASTINGS
Shallconsist of all clean automobile aluminum castingsof sufficient size tobe readily identified and to be free from iron,dirt,brass, bushings,and non-metallic items. Oil and grease not to total
more than 2%.
Twang—INSULATED ALUMINUM WIRE SCRAP
Shallconsist of aluminum wire scrap with various typesof insulation.To besold on a sample or recovery basis, subject to arrangementbetween buyerand seller.
Tweak—FRAGMENTIZER ALUMINUM SCRAP (from AutomobileShredders)
Derivedfrom either mechanical or hand separation, thematerial must be dry andnot contain more than 4% maximum free zinc,1% maximumfree magnesium,and 1.5% maximum of analytical iron. Not to contain more than atotal 5%maximum of nonmetallics,of which no more than 1% shall be rubberandplastics.To be free of excessively oxidized material, air bagcanisters, or anysealed or pressurized items. Any variation to be soldby special arrangementbetween buyer and seller.
Twire—BURNT FRAGMENTIZER ALUMINUM SCRAP (from AutomomobileShredders)
Incineratedor burned material must be dry and notcontain more than X% (% to beagreed upon by buyer and seller) ash fromincineration,4% maximum freezinc, 1% maximum free magnesium,
and1.5% maximum of analytical iron. Not to contain morethan a total 5%maximum of non-metallics, of which no more than 1% shall berubber andplastics.To be free of excessively oxidized material,air bagcanisters,or any sealed pressurized items.Any variation to be sold byspecialarrangement between buyer and seller.
Twist—ALUMINUM AIRPLANE CASTINGS
Shallconsist of clean aluminum castings from airplanesand to be free fromiron, dirt, brass, bushings, and non-metallic items. Oiland grease notto total more than 2%.
Twitch—FLOATED FRAGMENTIZER ALUMINUM SCRAP (fromAutomobile Shredders)
Derivedfrom wet or dry media separation device, thematerial must be dry andnot contain more than 1% maximum free zinc,1% maximumfree magnesium,and 1% maximum of analytical iron. Not to contain more than atotal 2%maximum of nonmetallics,of which no more than 1% shall be rubberandplastics.To be free of excessively oxidized material, air bagcanisters, or anysealed or pressurized items. Any variation to be soldby special arrangementbetween buyer and seller.
Wafer—MAGNESIUM CLIPS
Shallconsist of clean magnesium clips in crucible size,free ofcopper,aluminum, and zinc flashings and excessive oil and grease.Tobefree of all foreign attachments.
Walnut—MAGNESIUM SCRAP
Shallconsist of magnesium castings, magnesium engineblocks and transmissioncasings, bomber and car wheels, extrusions, and sheet.Material to befree from brass and copper inserts and all foreignattachments.To befree of anodes, hollow castings and explosives.Percentages ofandpenalties for dirt, oil, grease, and iron to be subject toagreementbetween buyer and seller. Excessively large pieces to benegotiated betweenbuyer and seller.
Wine—MAGNESIUM ENGRAVER PLATES
Tobe free of copper, aluminum, zinc, and electrotypeplates.To be cleanand free of all foreign attachments. Magnesium platesshipped loose byagreement between buyer and seller.
Wood—MAGNESIUM DOCKBOARDS
Shallconsist of clean magnesium dockboard cut or brokento size agreed uponby buyer and seller. To be free of all foreign attachments.
World-—MAGNESIUM TURNINGS
It is recommended that these materials be sold by specialarrangement between buyer and seller.
Zorba— FRAGMENTIZER NONFERROUS MIXED METALSCRAP (from Automobile Shredders)
Shallbe made up of a combination of the nonferrousmetals: aluminum, copper,lead,magnesium,stainless steel, nickel, tin, andzinc, in elemental oralloyed (solid) form. The percentage of each of thesemetals within thenonferrous concentrate shall be subject to agreement betweenbuyer andseller, may vary from shredder to shredder and may, in some cases, bezero for a particular metal. Shall be obtained by eddy current,airseparation, flotation, screening, other segregation technique(s) oracombination of the same. Shall have passed one or more magnets toreduce oreliminate free iron and/or large iron attachments. Shall befree of radioactivematerial, dross or ash. May be screened to permitdescription by specific sizeranges. May contain high densitynon-metallics. Items of exclusion, inclusionor limitation not set outin the above specifications, such as moisture andfree iron and/orattachments or the presence or absence of other metals, aresubject toagreement between buyer and seller. Material to be traded underthisguideline shall be identified as ZORBA with a number to followindicating theestimated percentage nonferrous metal content of thematerial (e.g. ZORBA 90 -means the material contains
approximately 90% nonferrous metal content).
Zebra—(High Density)
Shallconsist of high-density nonferrous metals producedby media separationtechnology containing brass, copper,zinc, nonmagneticstainless steel,and copper wire. Material to be dry and free from excessoxidation. Thepercentage and types of metals other than these, as well asthepercentage and types of nonmetallic contamination are to be agreedupon betweenthe buyer and seller.
Zeppelin—(Light Density)
Shallconsist of light-density nonferrous metals producedby media separationtechnology and contain thin-gauge aluminum and magnesium.Material to bedry and free from excess oxidation. The percentage and types ofmetalsother than aluminum and magnesium, as well as the percentage andtypesof nonmetallic contamination are to be agreed upon between thebuyer andseller.
Aroma—NEW NICKEL SCRAP
Shallconsist of clean new sheet, plate, bar, tube, andany other wroughtnickel scrap solids. Nickel minimum 99%; Cobalt maximum0.25%; Coppermaximum 0.50%. Free of castings, as well as
any foreign attachments or other contamination.
Burly—OLD NICKEL SCRAP
Shallconsist of old and/or new sheet, plate, bar, tube,and any other wroughtnickel scrap solids. Material to contain a minimum of 98%nickel; Coppermaximum 0.50%.This grade to be free of castings,soldered,brazed,sweated, or painted material, other metallic coating,foreignattachments, and any other contamination.
Dandy—NEW CUPRO NICKEL CLIPS AND SOLIDS
Shallconsist of clean, new, segregated (normallyaccepted analysis grades)either 70/30, 80/20, or 90/10 cupro nickel tube, pipe,sheet,plate, orother wrought solid forms. Must be free of foreign
attachments or any other contamination.
Daunt—CUPRO NICKEL SOLIDS
Shallconsist of old, and/or new, segregated (normallyaccepted analysisgrades either 70/30, 80/20, 90/10 cupro nickel tube,pipe,sheet, plate,or other wrought solid forms. Maximum 2% sediment
allowable.Any other forms of cupro nickel solids such ascastings,gates, risers,spills, etc., packaged separately, may or may not beincluded, only uponagreement between buyer and seller. Must be free of foreignattachmentsand all other contamination. Other particulars concerningphysicaldescription, analysis and packaging to be agreed upon betweenbuyer and seller.
Delta—SOLDERED CUPRO NICKEL SOLIDS
Shallconsist of segregated (normally accepted analysisgrades) either 70/30,80/20, 90/10 cupro nickel solids, soldered, brazed, orsweated, must befree of trimmed seams and edges and all other
contamination.
Decoy—CURPO NICKEL SPINNINGS,TURNINGS, BORINGS
Shallconsist of clean segregated (normally acceptedanalysis grades) either70/30, 80/20, 90/10 cupro nickel spinnings, turnings,orborings.Particulars concerning physical description, analysis,
packaging, to be agreed upon between buyer and seller.
Depth—MISCELLANEOUS NICKEL-COPPER AND NICKEL-COPPER IRON
Shallconsist of miscellaneous scrap in which the basicelements,by weight,are nickel and copper, such as copper nickelpeelings,plating racks, andhangers, and all nickel and copper in attached or
combined form. In all cases, miscellaneous nickel copperscrap should be sold by description and analysis.
Hitch—NEW R-MONEL CLIPPINGS AND SOLIDS
Shallconsist of clean, new, R-Monel sheet, plate, bar,rod, tube,pipe, or anyother wrought scrap, free of any foreign attachments orany othercontamination.
House—NEW MIXED MONEL SOLIDS AND CLIPPINGS
Shallconsist of new, clean R and K-Monel solids andclippings.Free of castmaterial, foreign attachments and all othercontamination.
Ideal—OLD MONEL SHEET AND SOLIDS
Shallconsist of clean R and K-Monel solids such assheet, plate,pipe, rods,forgings, screen and wire cloth. Must be free ofsoldered, brazed,welded, or sweated material, cast material, foreign
attachments, and all other contamination.
Indian—K-MONEL SOLIDS
Shall consist of clean K-Monel solids.
Junto—SOLDERED MONEL SHEET AND SOLIDS
Shallconsist of soldered and/or brazed miscellaneousgrades of Monel alloysin either wrought or cast form. Must be free of trimmedseams and edges,non-metallic filling, foreign attachments,and all othercontamination.Particulars concerning physical description, assay, andpackaging to beagreed upon between buyer and seller.
Lemon—MONEL CASTINGS
Shallconsist of various types of clean Monel castings,assaying minimum 60%nickel. Must be free of foreign attachments or any othercontamination.
Lemur—MONEL TURNINGS
Shall consist of mixed Monel turnings and boringscontaining a minimum of 60% nickel content, on a dry basis.
Pekoe—200 SERIES STAINLESS STEEL SCRAP SOLIDS
Shallconsist of all types of clean AISI Series StainlessSteel Scrap Solids,which contain a maximum of .5% copper, free of foreignattachments andother contamination.
Sabot—STAINLESS STEEL SCRAP
Shallconsist of clean 18-8 type stainless steel clipsand solids containing aminimum 7% nickel, 16% chrome, and have a maximum of.50% molybdenum,.50% copper, .045% phosphorous, and
.03%sulfur, and otherwise free of harmful contaminants.Particularsconcerning physical description, grading, additionalanalysis,andpreparation to be agreed upon between buyer and seller.
Ultra—STAINLESS STEEL TURNINGS
Shallconsist of clean 18-8 type stainless steel turningscontaining a minimum7% nickel and 16% chrome, and to be free of nonferrousmetals,nonmetallics, excessive iron, oil and othercontaminants.Particularsconcerning physical description, assay,packaging to be agreed upon betweenbuyer and seller.
Vaunt—EDISON BATTERIES
Nickel-iron batteries to be sold free of crates, copperterminal connectors,and excess liquid. Free of nickel cadmium batteries.