Shell AeroShell Fluid 41价格：0.00元/桶 最小起订量：1 桶 供货总量：100 桶 发货期限：自买家付款之日起3天内发货 有效期至：长期有效
| AeroShell Fluid 41 | |
| AeroShell Fluid 41 is a mineral hydraulic oil manufactured to a very high level of cleanliness, and possesses improved fluid properties. AeroShell Fluid 41 contains additives which provide excellent low temperature fluidity as well as exceptional anti-wear, oxidation - corrosion inhibition and shear stability. In addition metal de-activators and foam inhibitors are included in this high viscosity index fluid to enhance performance in hydraulic applications. AeroShell Fluid 41 is capable of wide temperature range operation. |
AeroShell Fluid 41 is dyed red.
Main Applications
-
AeroShell Fluid 41 is intended as an hydraulic fluid in all modern aircraft applications requiring a mineral hydraulic fluid. AeroShell Fluid 41 is particularly recommended where use of a "superclean" fluid can contribute to improvements in component reliability, and can be used in aircraft systems operating unpressurised between –54°C to 90°C and pressurised between –54°C to 135°C.
-
AeroShell Fluid 41 should be used in systems with synthetic rubber components and must not be used in systems incorporating natural rubber.
-
AeroShell Fluid 41 is compatible with AeroShell Fluids 4, 31, 51, 61 and 71 and SSF/LGF.
-
Chlorinated solvents should not be used for cleaning hydraulic components which use AeroShell Fluid 41. The residual solvent contaminates the hydraulic fluid and may lead to corrosion.
Specifications, Approvals & Recommendations
- Approved MIL-PRF-5606H* (both U.S. and European production)
- Approved DEF STAN 91-48 Grade Superclean* (European production only)
- Meets DEF STAN 91-48 Grade Normal (European production only) Equivalent to DEF STAN 91-48 Grades Superclean* & Normal (U.S. production only)
- Approved DCSEA 415/A (French)
- Analogue to AMG-10 (Russian)
- NATO Code H-515* (equivalent H-520)
- Joint Service Designation OM-15* (equivalent OM-18)
For a full listing of equipment approvals and recommendations, please consult your local Shell Technical Helpdesk, or the OEM Approvals website.
Typical Physical Characteristics
|
Properties |
MIL-PRF-5606H |
Typical US Production |
Typical European Production |
|
Oil Type |
Mineral |
Mineral |
Mineral |
|
Kinematic viscosity @100°C mm2/s |
4.90 min |
6.13 |
5.30 |
|
Kinematic viscosity @40°C mm2/s |
13.2 min |
15.68 |
14.1 |
|
Kinematic viscosity @–40°C mm2/s |
600 max |
384 |
491 |
|
Kinematic viscosity @–54°C mm2/s |
2500 max |
1450 |
2300 |
|
Viscosity index |
– |
214 |
Over 200 |
|
Flashpoint (Pensky Martin Closed Cup) °C |
82 min |
104 |
105 |
|
Autoignition temperature °C |
– |
230 |
230 |
|
Pour point °C |
–60 max |
<–60 |
<–60 |
|
Total acid number mgKOH/g |
0.20 max |
0 |
0.01 |
|
Evaporation loss 6 hrs @71°C %m |
20 max |
16.5 |
10 |
|
Water content ppm |
100 max |
55 |
<100 |
|
Relative density @15.6/15.6°C |
Report |
0.874 |
0.87 |
|
Properties |
MIL-PRF-5606H |
Typical US Production |
Typical European Production |
|
Colour |
Red |
Red |
Red |
|
Particulate contamination, number of particles per 5 to 15 μm 100 ml in size range |
10000 max |
1200 |
808 |
|
Particulate contamination, number of particles per 15 to 25 μm 100 ml in size range |
1000 max |
550 |
116 |
|
Particulate contamination, number of particles per 25 to 50 μm 100 ml in size range |
150 max |
70 |
44 |
|
Particulate contamination, number of particles per 50 to 100 μm 100 ml in size range |
20 max |
5 |
10 |
|
Particulate contamination, number of particles per over 100 μm 100 ml in size range |
5 max |
0 |
1 |
|
Copper corrosion |
2e max |
1b |
2b |
|
Steel on steel wear, scar diam mm |
1.0 max |
0.65 |
0.95 |
|
Rubber swell, L rubber % |
19 to 30 |
22 |
25.4 |
|
Corrosiveness & oxidation, 168 hrs @135°C - metal weight change |
Must Pass |
Passes |
Passes |
|
Corrosiveness & oxidation, 168 hrs @ 135°C - @40°C % viscosity change |
–5 to +20 |
8.08 |
+0.1 |
|
Corrosiveness & oxidation, 168 hrs @135°C - acid mgKOH/g number change |
0.20 max |
0.02 |
+0.1 |
|
Low temperature stability 72 hrs @–54°C |
Must Pass |
Passes |
Passes |
|
Shear stability - viscosity change @40°C |
Must Pass |
Passes |
Passes |
|
Shear stability - acid number change |
0.2 max |
Less than 0.2 |
Less than 0.2 |
|
Gravimetric filtration mg/100m |
0.3 max |
0.1 |
Less than 0.3 |
|
filtration time min |
15 max |
10 |
Less than 15 |
|
Foaming tendency |
Must Pass |
Passes |
Passes |
|
Barium content ppm |
10 max |
Nil |
Nil |
These characteristics are typical of current production. Whilst future production will conform to Shell's specification, variations in these characteristics may occur.
Health, Safety & Environment
- Health and Safety
Guidance on Health and Safety is available on the appropriate Material Safety Data Sheet, which can be obtained from http://www.epc.shell.com/
- Protect the Environment
Take used oil to an authorised collection point. Do not discharge into drains, soil or water.
以上"Shell AeroShell Fluid 41"信息由企业自行提供，该企业负责信息内容的真实性、准确性和合法性。本网对此不承担任何保证责任。
