LC1D交流接触器 LC1E交流接触器

施耐德LC1-D80、LC1-D80、LC1-D80、LC1-D80、交流接触器

施耐德LC1-D80、LC1-D80、交流接触器

施耐德LC1-D80、LC1-D80、交流接触器

专业代理销售施耐德LC1-D80交流接触器，本公司承诺施耐德LC1-D80交流接触器为厂家直接供货，价格公道，品质保证！如因质量问题

承诺可7天内免费换货！

Professional sales agent Schneider LC1-D80 AC contactor, the company promises Schneider LC1-D80 AC contactor for factory direct 

delivery, reasonable prices, quality assurance! Quality problems as a result of commitment can be 7 days free replacement!

施耐德LC1-D80交流接触器 基本特点和使用方法如下；

Following Schneider LC1-D80 AC contactor basic characteristics and method of use;

LC1-D06，LC1-D09，LC1-D12，LC1-D18，LC1-D25，LC1-D32

LC1-D06, LC1-D09, LC1-D12, LC1-D18, LC1-D25, LC1-D32

LC1-D38，LC1-D40LC1-D50，LC1-D65，LC1-D80，LC1-D95

LC1-D38, LC1-D40LC1-D50, LC1-D65, LC1-D80, LC1-D95

LC1-D115，LC1-D150，LC1-D170，LC1-D205 LC1-D245，LC1-D300

LC1-D115, LC1-D150, LC1-D170, LC1-D205, LC1-D245, LC1-D300

LC1-D410，LC1-D475，LC1-D620，LC1-D800

LC1-D410, LC1-D475, LC1-D620, LC1-D800

施耐德LC1-F交流接触器

Schneider LC1-F AC contactor

LC1F115，LC1F150，LC1F185，LC1F225，LC1F265，LC1F330，LC1F400，LC1F500

LC1F115, LC1F150, LC1F185, LC1F225, LC1F265, LC1F330, LC1F400, LC1F500

LC1F630，LC1F780，LC1F800，LC1F1000

LC1F630, LC1F780, LC1F800, LC1F1000

型号规格：CJX2-F115、CJX2-F150、CJX2-F185、CJX2-F225、CJX2-F265、CJX2-F330、CJX2-F400、CJX2-F500、CJX2-F630、CJX2-

F800 （LC1-F115、LC1- F150、LC1- F185、LC1- F225、LC1- F265、LC1- F330、LC1- F400、LC1- F500、LC1- F630、LC1- F800）

Model: CJX2-F115, CJX2-F150, CJX2-F185, CJX2-F225, CJX2-F265, CJX2-F330, CJX2-F400, CJX2-F500, CJX2-F630, CJX2-F800 (LC1-

F115, LC1- F150, LC1- F185, LC1- F225, LC1- F265, LC1- F330, LC1- F400, LC1- F500, LC1- F630, LC1- F800)

一、LC1相对应的是（CJX2、CJX4）系列交流接触器（以下简称接触器），主要用于交流50Hz或60Hz，交流电压至660V（690V），在AC-3使用类别下工作电压为380V时，额定工作电流至170A的电路中，供远距离接通和分断电路之用，并可与相应规格的热继电器组合成磁力启动器以保护可能发生过负荷的电路，接触器适宜于频繁地起动和控制交流电动机。

One, corresponding to the LC1 is (CJX2, CJX4) series AC contactor (hereinafter referred to as the contactor), mainly used in AC 50Hz or 60Hz, AC voltage to 660V (690V), used in the AC-3 category under the working voltage is 380V, the circuit rated current up to 170A, for remote switch on and off circuit to use, and with the corresponding specification of thermal relay are combined into a magnetic starter to protect possible overload circuit, contactor suitable for frequent starting and control of AC motor.

本接触器和LC1、LC2、LP1、LP2、CJX4-D具有相同功能相应规格可等同相互使用。是CJ0、CJ10等老产品理想的更换代产品。

The contactor and LC1, LC2, LP1, LP2, CJX4-D have the same function corresponding specifications can be equivalent to use each other. CJ0, CJ10 and other old product replacement product ideal.

二、正常工作条件和安装条件 

Two, the normal work condition and installation

1、周围空气温度为：-5℃~+40℃，24小时内其平均值不超过+35℃；

1, the ambient air temperature: -5 ℃ ~+40 ℃, within 24 hours of the average value of not more than +35 DEG c;

2、海拔：不超过2000m；

2, altitude: not more than 2000m;

3、大气条件：在+40℃时大气相对温度不超过50%，在较低温度下可以比较高的相对湿度，最湿月的平均最低温度不超过+25℃，该月的月平均最大相对湿度不超过90%。并考虑因温度变化发生在产品上凝露；

3, the atmospheric conditions: at +40 ℃ atmospheric relative humidity is not more than 50%, at low temperature can be relative humidity is high, average minimum temperature of the wet months of not more than +25 ℃, the monthly average maximum relative humidity of not more than 90%. And consider the gel in the product due to temperature change;

4、污染等级：3级；

4, pollution degree: 3;

5、 安装类别：Ⅲ类；

5, install class: class iii;

6、安装条件：安装面与垂直面倾斜度不超过±5°；

6, the installation conditions: installation surface and the vertical gradient of no more than ± 5 °;

7、冲击振动：产品应安装和使用在无显著摇动、冲击和振动的地方。

7, the impact vibration: products shall install and use local significant shake, shock and vibration in No.

8、安装方式：接触器除用螺钉安装外，还可用35mm，型标准卡轨安装。交流操作40-95可用35 mm或75mm卡轨安装；

8, installation: contactor with screws, but also with 35mm, standard rail installation. AC operation available 40-95 35 mm or 75mm rail mounting;

注：直流操作40-95只能用75mm卡轨，115-170有专用卡轨安装。 

Note: the DC operation of 40-95 can only use 75mm rail, 115-170 has dedicated rail installation.

三、结构特征

Three, structural characteristics

1、接触器为防护式，动作结构为直动式，触头为双断点，具有体积小，重量轻、功耗低、寿命长、安全可靠等特点；

1, the contactor for protective type, action structure for direct drive type, contact is the double breakpoint, has the advantages of small volume, light weight, low power consumption, long service life, safety and reliability etc.;

2、接触器可组成机械可逆联锁磁力启动器，星三角减压启动器，还可根据用户选用增加辅助触头组、空气延时头等组合多种派生系列产品。 

2, the composition of mechanical interlocking contactor can be reversible magnetic starter, star delta decompression starter, can according to user selection of auxiliary contact group, air delay first combination of derivative products.

本文引用地址：http://www.worldmetal.cn/sell/show-1651844-1.html
以上"LC1D交流接触器 LC1E交流接触器"信息由企业自行提供，该企业负责信息内容的真实性、准确性和合法性。本网对此不承担任何保证责任。