氧化表面移印油墨价格:180.00元/公斤 最小起订量:1 公斤 供货总量:10000 公斤 发货期限:自买家付款之日起1天内发货 有效期至:长期有效
1、适用范围:五金、金属、玻璃、陶瓷、电镀、大理石等材料丝印移印2、特性:耐冲压、耐折弯、免烘烤自干、耐酒精、耐酸碱、耐汽油、耐腐蚀。 3、技术参数: a.粘度:8000-12000CPS; b.细度:5UM↓、光泽:60°↑; c.干燥条件:自干24小时; d.铅笔硬度:2H↑; e.耐酒精:99%乙醇500g力来回超过30次; f.耐磨:500g力来回超过30次; g.过网性能:77T-145T网纱; 4、稀释剂的选择:稀释剂:S-3;使用前添加10%-15%的DB-01固化剂效果更好。 5、注意事项: a.不可与其它油墨混用; b.使用S-3慢干稀释剂稀释; c.加过固化剂的油墨必须在3小时内用完; d.密封保存,远离火源。 6、应急处理措施: 备注:由于材料及使用中的变数,可能是结果会有变化,以上数据仅供参考,使用前请自行测试。 1, the scope of application: no halogen ink can be printed, ABS, PC, PS, acrylic, metal, electroplating, UV surface. 2, characteristics: medium and dry, ethanol, acid resistance. 3, technical parameters: A. viscosity: 8000-12000CPS; B.: 5UM:: gloss, fineness of 60 degrees up; C. dry conditions: 24 hours from dry; D. pencil hardness: 2H up; E. resistance to alcohol: 99% ethanol 500g force back and forth more than 30 times; F. wear: 500g force back and forth more than 30 times; G. n e t performance: 77T-145T; 4, thinner choice: thinner: S-3; before using the 10%-15% to add DB-01 curing agent better effect. 5, matters needing attention: A. and other printing ink; B. using S-3 slow dry diluent dilution; C. plus the curing agent of the ink must be used up within 3 hours; D. sealed to save, away from the fire source. 6, emergency treatment measures: A. such as dipped into the eye immediately clear water cleaning, serious medical treatment, B. fire fighting measures: dry powder, foam fire extinguisher or sand. ] Note: due to the materials and the use of variables, possibly is the change, the above data are for reference only, before using please self testing.
本文引用地址:http://www.worldmetal.cn/sell/show-2039729-1.html
以上"氧化表面移印油墨,移印氧化表面油墨"信息由企业自行提供,该企业负责信息内容的真实性、准确性和合法性。本网对此不承担任何保证责任。
以上"氧化表面移印油墨,移印氧化表面油墨"信息由企业自行提供,该企业负责信息内容的真实性、准确性和合法性。本网对此不承担任何保证责任。