纺织机械：气流纺纱机RotorSpinning

纺纱设备(纺机)价格：5555555.00元/件 最小起订量：1 件 供货总量：104444 件 有效期至：长期有效

【 产品特色 】
1、能将0.12-0.27Ne(5000-2200tex)的二道熟条直接纺制成14－42Ne(147-14.7tex)的细纱。
2、本机型配有辅助吸嘴及留尾纱机构。
3、本机配有输送带机构，以减轻落筒的劳动强度。
4、本机带有张力补偿装置，及储纱装置，可以纺制锥筒纱。
5、采用变频调速技术PC（可编程序控制器）控制。
6、具有工艺参数设置、检测及显示功能。
7、机身部分可整节拆装发运。

I. We adopt new air-draining spinning frames. Compared with the air-drafting type, the draining type has the following advantages:
1. Quality of the yarn is improved because the pressure of the air-drafting cup-winding spinning frame is uneven and the two ends are better than the middle part in drafting air. In addition, the cup of the air-drafting always deposit dust and thus impair the quality of yarns.
2. With a high efficiency of filtering the dross, the spinning frame can process the raw stripes with 2% of dross
3. It widens the range of processed yarns.
4. The yarn breakage rate of the air-drawing frame is lower than that of the air-drifting frame and raw materials with lower quality can be fully used too.
5. The air-drawing frame can ensure the transfer of fibers. It is unnecessary to speed up the carding rollers. In this way, it reduces power consumption.
6. It helps to reduce the bearing pressure by 15-30%. Reduction of bearing temperature helps to prolong its service time and further to increase the rotating rate while reducing the power consumption by the cup.
7. Using the same raw material, the air-drawing spinning frame can increase its rotating rate by 10000 to 20000 compared with air-drafting frame. In this way, it can produce yarns of the same good quality.

II. The highest rotating rate can reach 90,000.
1. It adopts imported high-speed bearing. This bearing is reliable and it has long lifetime.
2. The high speed of cup guarantees high quality of the yarns.

III. It adopts half-automatic piecing technique.
1. The end-piecing technique applied with the cup at a high rotating speed ensures high efficiency and flawless end piecing.
2. With just a minute of training, the operator will be capable of piecing the ends comparable with the standard of the automatic cup-winding frame.
3. The joint intensity of the processed yarns is no less than 60% of the ordinary yarns and will not influence the following process.

IV. Tangential belts, major bearings and carding rollers use imported parts.

宗鑫纺织机械有限公司，始建于1995年，是一家专业生产纺织机械的现代化企业。公司现有职工200多人，占地面积18000平方米。公司坐落在风景秀丽，人杰地灵，经济发达的浙江嵊州市领带工业园，交通十分便捷，地理位置得天独厚。

公司拥有主导产品有：转杯纺纱机、短纤倍捻机、并纱机、化纤真丝倍捻机。

优秀的人才队伍和雄厚的研发实力为宗鑫公司提供了强有力的保证。
宗鑫以高新技术为依托正朝着高精尖方向前进，为宗鑫纺机走向国内外市场赢得了机遇。

宗鑫纺机建立了一套服务快速反应队伍，使用户“选宗鑫称心，用宗鑫放心”
公司以科技是第一生产力为理念，努力把产品做精，把市场做大，把企业做强。

公司以诚信为宗旨，高度含金量奉献给用户。
公司遵循求真、务实、创新、拼搏的企业精神，凭着雄厚的实力，敏捷的目光、超前的意识、先进的管理水平描绘着“宗鑫”立足于世界的雄伟蓝图。