通用型 带按键 一键启动

Engine Start Stop Button Engine One Touch Start keyless Switch

New Design for Engine Start Stop Button Engine Touch Start  

Start button contact more than 500000 times

Start button lifetime: more than 20 years

Low voltage automatic protection

Main Unit Function Description

1. Alarm: Turn ACC off and the car is stopped the system will enter arming mode after 15 seconds automatically.

2. Disarm: In arming mode, when the responder gets close to the wire circle, the system will sound “Bi, Bi”, which indicates the system is disarm.

3. Code learning: Press the button on PCB for 5 seconds, when the siren sound one time which indicates the system is learning the mode.

Instruction Manual

A: Step the brake and press the ignition button.

B: If do not step the brake the sequence of pressing the ignition button is followed as ACC-ON-OFF-ACC-ON.

C: When driving, step the brake and press the ignition button, the engine off.

D: The difference of remote engine start in cold weather and warm weather.

1. In warm weather, press engine start button shortly and the engine will be started.

2. In cold weather, long press engine start button until the engine is started.

Our push button starts working modes as follows:

In disarming, push footbrake; press start button one time shortly, car engine is started after 0.5 second. Push button LED is on all the time.

According to above same meaning, if you want to let engine off, also push footbrake, press start button one time shortly, engine is off, push button LED is still on.

Without pushing footbrake, you can make a switch among ACC-ON-OFF, press one time, ACC is power, and then press one time, dashboard is power, press it again, power is off, ACC is off.

In the special situation, you can press start button lonely, because in some time, for example it is hard to start your car under the extreme cold weather in winter, you can start engine by press push button lonely.

Combined push button start and RFID alarm system, work together well, save much cost!